Makita DLX2180TJ 18v 2x5Ah LXT Li-ion BL Combi Drill Impact Driver Kit
Product no.: DLX2180TJ
Description
Makita 18v 2x5Ah LXT Li-ion BL Combi Drill Impact Driver Kit
The Makita DLX2180TJ is a 18v LXT Brushless Twin Kit including Models DHP484 18v Combi Drill and DTD153 18v Impact Driver. The Makita Brushless motor is precision engineered to be up to 50% more efficient than a comparative model. Without brushes in place to apply friction a Brushless motor can produce a greater measure of torque per weight. With more torque at your disposal less power is required for day to day use, adding to the motors efficiency and extending the products overall lifetime as maintenance becomes less of an issue. The DLX2180TJ is supplied with 2 x 5.0Ah Li-ion lightweight and shock-absorbing battery packs, a charger and a type 3 Makpac.
DHP484 Features and Benefits:
- Brushless motor
- Electric brake
- 2 mechanical gears.
- Variable speed control by trigger
- Forward/reverse rotation
- LED job light
- Compact Overall Length of 182mm
- Keyless Chuck
- Aluminium Gear Housing
- All metal gear construction
- Ergonomic soft grip
- Belt clip
DHP484 Technical Specification:Voltage - 18 v
Capacity in Steel - 13 mm
Capacity in Wood - 38 mm
Chuck Capacity - 1.5 - 13 mm
Capacity in Masonry - 13 mm
Blows per Minute (Hi) - ipm - 0 - 30,000 ipm
Blows per Minute (Lo) - ipm - 0 - 7,500 ipm
Noise sound pressure - 88 dB(A)
Noise sound power - 99 dB(A)
Noise K factor - 3 dB(A)
No Load Speed (Hi) - 0 - 2,000 rpm
No Load Speed (Lo) - 0 - 500 rpm
Torque Settings - 21 + drill
Max. Fastening Torque (Soft Joint) - 30 Nm
Max. Fastening Torque (Hard Joint) - 54 Nm
Vibration K factor - 1.5 m/sec²
Vibration: Impact drilling into concrete - 8.0 m/sec²
Vibration: Drilling into metal - 2.5 m/sec²
Net weight - 1.8 kg
DTD153 Features and Benefits:
- Brushless motor
- One touch sliding chuck for easy bit installation and removal.
- LED job light
- Ergonomic soft grip
- Electric brake
- Variable speed control by trigger
- Forward/reverse rotation
- Compact overall length.
DTD153 Technical Specification:Voltage - 18 v
Driving Shank - 6.35mm (1/4") Hex
Machine Screw - M4-M8
Impacts per Minute - 0 - 3,600 ipm
Standard Bolt - M5-M16
High Tensile Bolt - M5-M14
Coarse thread (length) - 22 - 125 mm
Noise sound pressure - 96 dB(A)
Noise sound power - 107 dB(A)
Noise K factor - 3 dB(A)
No Load Speed - 0 - 3400 rpm
Max Fastening Torque - 170 Nm
Vibration: Fastening Bolt - 13.0 m/sec²
Vibration K factor - 1.5 m/sec²
Net weight - 1.5 kg
Supplied With:1 x Makpac Type 3 Connector Case
1 x DC18RC Compact Charger
1 x DHP484Z 18V Combi Drill
1 x DTD153Z 18V Impact Driver
2 x 5Ah Batteries