Router Bits

Router Bits

Router Bits made for any job to a proffessional


Display per page
Sort by

Trend Two Flute Cutter 6mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£9.04 *
In stock
Can be shipped within 1-3 days

Template profile diameter

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage.

£17.22 *
In stock
Can be shipped within 1-3 days

Trend Two Flute Cutter 12mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£12.48 *
In stock
Can be shipped within 1-3 days

Trend Two Flute Cutter 6.3mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£10.76 *
In stock
Can be shipped within 1-3 days

Trend Two Flute Cutter 8.0mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£10.76 *
In stock
Can be shipped within 1-3 days

Trend Two flute cutter 10mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£12.81 *
In stock
Can be shipped within 1-3 days

Trend Two Flute Cutter 12mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£16.47 *
In stock
Can be shipped within 1-3 days

Two Flute Cutter 15.0mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£13.89 *
In stock
Can be shipped within 1-3 days

Two Flute Cutter 20.0mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£14.75 *
In stock
Can be shipped within 1-3 days

Trend Dovetail cutter angle 104 degrees 12.7mm diameter

To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.

£14.75 *
In stock
Can be shipped within 1-3 days

Rounding over 6.3mm radius x 12.7mm cut

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings.

£27.77 *
In stock
Can be shipped within 1-3 days

Self guided trimmer 12.7mm diameter

Self guided trimmer 12.7mm diameter: Used for trimming plastic or plywood overlays. Also for copy profiling with a template.

£16.04 *
In stock
Can be shipped within 1-3 days

Self guided chamfer angle 45 degrees x 12.7mm Cut

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath.

£23.25 *
In stock
Can be shipped within 1-3 days

Trend Biscuit jointer set

The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.

In stock
Can be shipped within 1-3 days

Trend Two flute cutter 12.7mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£23.25 *
In stock
Can be shipped within 1-3 days

Trend Two flute cutter 12.7mm diameter

Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature.

£14.75 *
In stock
Can be shipped within 1-3 days

Trend Guided trimmer 6.35mm diameter x 25.4mm

The Trend Guided trimmer 6.35mm diameter x 25.4mm is used for trimming plastic or plywood overlays. Also for copy profiling with a template.

£13.56 *
In stock
Can be shipped within 1-3 days

Trend Intumescent cutter set 10mm x 24mm

For either frame or door applications, with standard Intumescent Strip. Alternative bearings can be purchased to suit other thicknesses.

£26.59 *
In stock
Can be shipped within 1-3 days

Trend Hinge sinking 35mm diameter

This economy range is supplied without scribers and are used for recessing holes in melamine covered chipboard. Use with pillar drills only.

£9.15 *
In stock
Can be shipped within 1-3 days
* Prices include VAT